GX Series amplifiers are ideal for professional entertainers who require maximum performance and portability on a limited budget. QSC designers, headed by Pat Quilter, have optimized output and appearance while reducing raw material cost and weight. It's all here – dramatic styling, easy hookup and adjustments, excellent audio quality and QSC reliability.
| 8 ohms / 1 kHz (both channels driven) |
300W |
| 8 ohms / 1 kHz (single channels driven) |
350W |
| 4 ohms / 1 kHz (both channels driven) |
425W |
| 4 ohms / 1 kHz (single channels driven) |
500W |
Distortion (typical)
20 Hz - 20 kHz, 1 dB below rated power |
8 ohms: less than 0.05%
4 ohms: less than 0.1% |
| Signal to Noise (20 Hz - 20 kHz) |
100 dB |
| Input Sensitivity |
1.2 Vrms |
| Voltage Gain (8 ohms) |
32.2 dB |
| Output Circuitry |
Class B |
| Power Requirements (1/8 power, pink noise at 4 ohms, 120V) |
6.3A |
| Frequency Response |
20 Hz - 20 kHz, +0, -1 dB |
| Dynamic Headroom (4 ohms) |
2 dB |
| Input Impedance (ohms) |
Greater than 20k (balanced) |
| Maximum Input Level |
+24 dB (16 Vrms) |
| Input Connectors (each channel) |
3-pin XLR and 1/4" TRS, balanced, parallel Phono, unbalanced |
| Output Connectors (each channel) |
Speakon, 1/4", Binding posts |
| Amplifier and Load Protection |
Short circuit, open circuit, thermal, RF protection
Load protected against DC faults |
| Front Panel Controls and Indicators |
Gain controls, 21 detents
Red Clip LEDs, proportional, 0.1% THD threshold
Green Signal LEDs, threshold -35dB
Blue Power LED, AC on |
| Rear Panel Controls |
Full Range / Crossover switch
100 Hz, 3rd order LP (sub), 2nd order HP (top) |
| Dimensions |
Height: 3.5"
Width: 19"
Depth: 10.1" |
| Weight |
25lbs |
