The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability.
The PLX3602 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. The PLX3602 features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status.
| STEREO MODE |
8 ohms
FTC 20Hz - 20 kHz 0.05% THD
EIA 1 kHz 0.1% THD |
725W
775W |
4 ohms
FTC 20hz - 20 kHz 0.05% THD
EIA 1 kHz 1% THD |
1100W
1250W |
2 ohms
EIA 1kHz 1% THD |
|
| BRIDGE MONO MODE |
8 ohms
20Hz-20kHz 0.1% THD
EIA 1 kHz 0.1% THD |
2500W
2600W |
| |
|
| Signal to Noise (20 Hz - 20 kHz) |
-107 dB |
| Input Sensitivity @ 8ohms |
1.25 Vrms |
| Gain @ 8 ohms |
36 dB |
| Output Circuitry |
2-Tier Class H |
| Distortion (SMPTE-IM) |
Less than 0.02% |
Typical Distortion
1/8 rated power, 20 Hz-20 kHz
Full rated power, 20 Hz-20 kHz |
Less than 0.02%
Less than 0.02% |
| Frequency Response |
20 Hz-20kHz, -.5dB |
| Damping Factor |
Greater than 500 |
| Input Impedance |
20k ohms balanced
10k ohms unbalanced |
| Input Clipping |
11 Vrms (+21 dBu) |
| Cooling |
Cariable-speed fan, rear-to-front air flow |
| Input Connectors, each channel |
3-pin XLR and 1/4" TRS balanced |
| Output Connectors, each channel |
Neutrik NL4 Speakon and Touch-proof binding posts
(Both Channels available on Ch 1 NL4 connector) |
| Rear Panel Switches |
Input Configuration: Bridge/Stereo/Parallel
Clip Limiters each channel
Filters (per channel): top 100 Hz HPF/Full/Sub 100 Hz
LPF & 33 Hz HPF/Full (infrasonic) |
| Front Panel Controls |
Detented Gain Attenuator: 0 to ∞ dB |
| Front Panel Indicators |
Clip: Red LED
-10: Green LED
Signal (-35dB): Green LED
Power: Blue LED
Parallel: Amber LED
Bridge Mono: Amber LED |
| PROTECTION |
| Amplifier Protection |
Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection
Stable into reactive or mismatched loads |
| Load Protection |
On/off muting, DC-fault power supply shutdown |
| Infrasonic |
-3 dB, 5 Hz |
| DC fault |
Power supply shutdown |
| Ultrasonic |
-3 dB, 85 kHz |
| Short Circuit |
Cutback |
| Thermal |
Muting at 90 degrees C |
| Over Current |
Active clip limiting
Power supply cutback |
| High Line |
standard +15%, survive +25% |
| :Low Line |
-33% |
| PHYSICAL |
|
Dimensions
Height
Width
Depth, Rack mounting surface to rear panel
Overall Depth |
3.5" (2 rack spaces)
19"
12.8"
14.875" |
| Weight |
21lbs |
| Agency Approvals |
CE, FCC, cUL, UL |
| |
|
| |
|
| CURRENT CONSUMPTION |
1/8 Power
8 ohms
4 ohms
2 ohms |
7.7A/120V
11.5A/120V
18A/120V |
1/3 Power
8 ohms
4 ohms
2 ohms |
13A/120V
19.5A/120V
31A/120V |
Full Power
8 ohms
4 ohms
2 ohms |
25A/120V
40A/120V
63A/120V |
